Saab 9-5 (2006 - 2010) Single/Double DIN car stereo upgrade fitting kit (BASIC RADIO)

Complete stereo upgrade kit to install a Single/ Double DIN aftermarket car stereo and retain the use of the steering wheel controls in a Saab 9-5 (2006 - 2010) vehicle with a basic original GM radio (Non-navigation)

This head unit fitting kit includes:

• SAAB Bose/Harmon Kardon amplifier ISO adapter (20-273-SAAB)
• Steering wheel control interface (29-UC-050-SAAB)
• Saab 9-5 (2006-2010) Single/Double DIN fascia (50-310)

SAAB Bose/Harmon Kardon amplifier ISO adapter (20-273-SAAB)

This interface converts the high level audio output of a new head unit to a low level pre amplified signal which will work with an amplifier. 4 adjustable channels for optimum audio quality, it has a built in ground loop isolator and filters to get the best sound from the amplifier.

Fakra to DIN car aerial antenna adapter cable (Part of 29-UC-050-SAAB)

Male Fakra to Male DIN car aerial antenna adapter cable. This cable adapts from a Fakra connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

Steering wheel control interface (29-UC-050-SAAB)

Saab Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Use with Saab cars with GM LAN bus connectors behind the radio. Does not include Telephone answer and reject features. This model is universal and can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units. It is supplied complete with instructions on how to code the head-unit to the interface.

UNICAN patch lead set (29-UCCAB-SET) 

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

Saab 9-5 mk1 facelift (2006-2010) Single/Double DIN fascia (50-310)

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version. Fits Saab 9-5 mk1 facelift (2006-2010) car models (WITH ORIGINAL GM RADIO. A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

PLEASE NOTE:

• This product requires professional installation. It should be fitted by an installer with car audio experience, fitting skills, and technical knowledge.
• If using for double din you will need to cut out the central bar and will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit. If not you will need our cage item number 51-013
• This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.
• This kit is only for vehicles with original standard radios.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.