Rear View Camera Kit Smart ForTwo 453 (Third Generation)

A high-quality rear view camera kit, designed to work with your factory fitted infotainment system. A discreet camera that will give you moving guidelines with a high quality camera resulting in an image on the navigation screen to aid you in reversing and parking. The resulting image will provide a clear and sharp picture in low light conditions, also the camera will work perfectly well in rainy conditions. 

Benefits Of Having A Reverse Camera In Your Smart ForTwo

• Guidelines can be really helpful so the driver can accurately estimate the width of the vehicle parking space whilst reversing.
• The driver can see any obstructions behind the vehicle during the reversing manoeuvre
• The driver can see any any blindspots which are not visible to the driver
• Greater vehicle safety management during reversing manoeuvres
• Makes reversing much safer and more convenient

Dynamic Guidelines

This Kit provides Dynamic Guidelines.

Scope of Delivery

• 1 x reverse camera
• 1 x reverse camera integration cable 
• 1 x Coding dongle* 
  
  * Coding Dongle is non-returnable item. Once its plugged in to the vehicles OBD, it will log the vehicles VIN and make inusable with anyother vehicle. 

What's special about the full coding dongle?

With this particular Coding interface you are saving money, time and energy.

Reusable at any time..
After a retrofit, it is usually necessary to perform a coding on the vehicle. The supplied dongle does the complete coding depending on the vehicle equipment. Even if you drive with your vehicle to a workshop and the coding is reset to factory settings (SVM adjustment): don't panic! Reconnect the coding dongle to the OBD interface, wait a few seconds until the LED goes out – and you're done!

Very easy to use..
Plug & Play. Just Plug the coding dongle into the OBD port and an LED display indicates whether the coding has been successfully carried out in the vehicle.

Time saving..
You save a lot of time compared to manual coding due to the simple plug and play functionality. The required coding time with the dongle is usually not more than 30 seconds. For many other dongle based coding systems, coding is dependent on the existing equipment. This is usually a complicated process and by doing it manually, according to our experience, it leads to problems and long periods of troubleshooting.

NOTE: Only suitable for vehicles with factory installed navigation system

*Installation is optional via the dropdown